HANGZHOU ZETIAN TECHNOLOGY CO., LTD.
TY_ENS
Nonferrous Aluminum Measuring Points and Solutions

Nonferrous Aluminum Measuring Points and Solutions

In the process of coal-fired power generation, pulverized coal is heated by Pulverized Fired Boiler with high temperature, and fly ash is sent out with flue gas and collected by the dust collector. Fly ash is a typical industrial solid waste in the process of coal-fired power generation. The main component of fly ash is alumina oxide which accounts for 15%-46% Soda-lime sintering process which has been widely used at home and abroad is the main method to extract aluminum on fly ash. It would optimize calcination process control and reduce emission by installing an online gas monitoring system.

Nonferrous Aluminum Measuring Points and Solutions

NO. Measurement
point
Temperature
Pressure Measurement components
Detection purpose
Recommend products*
1 Calciner down
stream
/
/
CO: 0-2%, O2

Monitor calcining condition of fuel, adjust
production device to optimize production
LGT-106
2 After dedusting
/
/
CO: 0-2%, O2

Monitor calcining condition of fuel, adjust
production device to optimize production
LGT-100
3 Emission tack of Calciner down
stream
/
/
CEMS(7parameters)
Online detect the condensation of each
component in tail gas emission
EM-5


Product Inquiry