HANGZHOU ZETIAN TECHNOLOGY CO., LTD.
TY_ENS
EM-5-CD Continuous Emission Monitoring System (cold dry)

EM-5-CD Continuous Emission Monitoring System (cold dry)

EM-5-CD Continuous Emission Monitoring System (cold dry)

Overview

CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for specific occasions. After dedusting by sampling probe, tracing by heating pipe, dehydration and cooling by two-step condensing, the measured gas is analyzed by the heated gas analysis module (TDLAS and DOAS technique). It is an effective solution to solve the technical problem that large humidity variation of the waste incineration and other occasions lead to measuring data fluctuation.

Feature Of EM-5-CD Continuous Emission Monitoring System (cold dry)


  • Fast dehydration and cooling by two-step condensing, reducing contact time of air and water, lower SO2 loss;
  • The analyzer uses micro-heating technology, reducing the maintenance cycle of the lens;
  • Fast sampling by loop sampling pumps, shorten response time;
  • Dehydration and dedust by multi-stage filtration, high reliability;
  • Calibration for whole process can be realized.

Application Of EM-5-CD Continuous Emission Monitoring System (cold dry)


Application for exhaust emission monitoring and process control such as coal-fired power plants, garbage power plant, cement, glass, lime factory, ceramics factory, sinter, coke oven, deSOx, deNOx technology.

Specification Of EM-5-CD Continuous Emission Monitoring System (cold dry)


  • SO2: 0~300~3000ppm, O2: 0~25%
  • NOx: 0~300~3000ppm, Humidity: 0~40%
  • Dust: 0~200mg/m3, 0~10g/m3
  • Flow rate: 0~40m/s (customizable)
  • Temp: 0~300℃ (customizable)
  • Pressure: -10kPa~+10kPa (customizable)
  • Dimension: 800mm×600mm×1800mm
  • Heating Temp: 120℃~180℃
  • Enclosure Protection: cabinet IP42, others IP65
  • Power Supply: 220VAC, 4000W
  • Working Temp.: -10℃~+40℃
  • Working Humity: 0~95%RH (non-condensing)

Product Inquiry