HANGZHOU ZETIAN TECHNOLOGY CO., LTD.
TY_ENS
Temperature, Pressure and Velocity Monitor

Temperature, Pressure and Velocity Monitor

Temperature pressure & velocity integrated monitor is a new generation online monitoring instrument, which can monitor temperature, pressure and velocity of flue gas inside pipeline for a long term under poor environmental condition. Those are important parameters when calculating pollutant emission in Continuous Emission Monitoring System (CEMS) of stationary pollution source.

The monitor is equipped with high-precision micro differential pressure /static pressure sensor with purging unit. Compared with conventional integrated monitor, it is able to measure not only the value of purging pressure, but determine whether there is pressure or not. In addition, the lower limit of velocity can reach as low as 1m/s. It also owns functions of auto-timing or manual pressure & velocity calibration. LCD screen displays all measuring data and signals, convenient for reading and debugging. It is convenient for transportation, installation and maintenance for its small size.

The temperature pressure & velocity integrated monitor is based on pitot differential pressure velocity measurement principle. During measurement, insert the  probe of pitot tube into pipeline and make the direction of probe dynamic hole face the flow direction directly and static hole back to the flow direction. Transfer dynamic pressure and static pressure to pressure transmitter respectively and then calculate velocity value according to formula.

When measuring  differential pressure, differential pressure transmitter is required to measure both dynamic pressure and static pressure. Thus, special attention shall be paid to the direction of pitot tube during installation, making sure both pressure-acquiring ports are consistent with the flow direction of flue gas (dynamic pressure measurement port is required to align with coming direction of flue gas while static pressure measurement port aligns with the departure direction of flue gas). There are two installation methods, vertical type and horizontal type, as shown in the following figure.


Feature of Temperature, Pressure and Velocity Monitor:

  • Ultralow range pressure sensor to realize 1m/s flow velocity measurement
  • Operation unit with LCD display: provide friendly human–machine interaction interface
  • Able to set regular purging time, velocity field parameter, pitot  coefficient and etc.
  • Overvoltage protection to effectively prevent pressure sensor from damage and reduce operation cost
  • Automatic zero calibration; strengthen output signal
  • Anti-blocking and anti-corrosion design
  • High accuracy, small impact and simple pipeline design
  • Able to measure pressure of purging gas and determine if there is gas pressure
Product Inquiry