ERMS-2000-V Vertical Stationary Vehicle Exhaust Remote Sensing System

Features Of ERMS-2000-V Vertical Stationary Car Emissions Test Equipment

• Stationary overlook installation:

dispensing with repetitive installation and overcome the accurate detection for multi-lane that current remote device cannot achieve to make multi-lane independent and simultaneous detection possible; not required people for watching to economize on manpower;

• Simultaneous monitoring on gasoline/diesel vehicle:

This car emissions test equipment adopts spectrum technology of high stability, which can detect emission pollutants of both gasoline and diesel vehicles at the same time to greatly reduce device cost;

• Narrow-wave radar speed measurement:

adopt narrow-wave radar speed measurement with low microwave irradiation, low power consumption, long service life, high stability, and reliability; locate target accurately to avoid adjacent clutter interference; fast response time to ensure the capture rate and instantaneity of the target;

• Integrated calibration system:

four components (CO, CO2, HC, NO) can be calibrated simultaneously, support both manual/auto calibration with simple operation and high efficiency;

• Large measuring range:

a portal frame is as high as 4-6 meter, which is able to monitor emission for different types of vehicle; full road coverage without occupying lane and affecting traffic;

• Real-time data matching:

real-time data matching without post-processing; output monitoring results in real time; combined with vehicle identification technology, screen excessive emission vehicle;

• Remote online monitoring system:

online monitor battery status, calibration state, system alarm information, wireless communication signals and etc. Remote monitoring and operation, convenient for the operator to monitor system parameters;

• Auto record and storage:

logs will record all the operating and alarm information for query and tracing, which is convenient for problem processing and solving. The outage will not affect data storage

Application Of ERMS-2000-V Vertical Stationary Car Emissions Test Equipment

The car emissions test equipment manufactured by ambient air quality monitoring system manufacturers like ZETIAN, is used for the online monitoring of CO, CO2, NOx, HC, and opacity in vehicle exhaust emission. All parts are in the deft design and convenient for installation, which can be installed in all road sections and toll gates. It can form an online monitoring web through appropriate deployment in the typical area. Combined with network transmission technology,it can achieve data sharing and result display with environment detection center and vehicle management center, which provide the scientific basis for decision maker and vehicle exhaust pollution control measures, thus achieve the goal of online monitoring for the city vehicle pollution.

Specification Of ERMS-2000-V Vertical Stationary Car Emissions Test Equipment

Factors	Range	Absolute Error	Relative Erro
CO	0~10%	±0.25%	±10%
CO2	0~16%	±0.25%	±10%
HC	0~10000ppm	±10ppm	±10%
NO	0~10000ppm	±20ppm	±10%
Opacity	0~100%	±2%	±5%
Smoke factor	0~50	±0.2	±10%
Optical absorption coefficient	0~16m-1	/	±10%

• Pollutant Repeatability: NO, HC, CO, and CO2 is a half of the maximum permissible error.
• Speed Range: 5km/h~120km/h
• Speed Detection Error: ≤±1.5km/h
• Acceleration Error: ≤±0.2m/s2
• Vehicle Image Capture Rate: ≥98%
• Vehicle License Recognition Rate: ≥90%
• Vehicle Image: picture will be saved in database in form of JPEG
• Data Transmission Method: wireless wifi, wired broadband or 4G transmission
• Response Time: ≤0.5s (T90) (system processing period)
• Ambient Temperature: -40℃~+85℃, error≤±0.2℃
• Relative Humidity: 0~100%RH, error≤±3%RH
• Wind Seed: 0~60m/s, error≤±0.3m/s or ±3%, take the maximum
• Atmospheric Pressure: 10hPa~1100hPa, error≤±5hPa