HANGZHOU ZETIAN TECHNOLOGY CO., LTD.
TY_ENS
EM-5-HW Continuous Emission Monitoring System (hot wet)

EM-5-HW Continuous Emission Monitoring System (hot wet)

EM-5-HW Continuous Emission Monitoring System (hot wet)

Overview

CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control, and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for a particular occasion. After dedusting by sampling probe, tracing by heating pipe, the measured gas is analyzed by the hot gas analysis module (TDLAS and DOAS technique). It is an effective solution to the technical problem that the absorption of SO2 by condensation water leads to low measuring data. Especially in low concentration measurement occasions, it has incomparable advantages.

Feature Of EM-5-HW Continuous Emission Monitoring System (hot wet)


  • All the indexes are measured in the condition of high temperature, avoiding low measuring data which resulted from the absorption of SO2 by condensation water;
  • Simple system structure, no moving parts such as diaphragm pumps and a peristaltic pump, high reliability;
  • Self-developed core module and algorithm;
  • Compact structure, convenient to transport and installation;
  • Calibration for the whole process can be realized.


Application Of EM-5-HW Continuous Emission Monitoring System (hot wet)


Application for exhaust emission monitoring and process control such as coal-fired power plants, garbage power plant, cement, glass, lime factory, ceramics factory, sinter, coke oven, DeSOx, DeNOx technology.

Specification Of EM-5-HW Continuous Emission Monitoring System (hot wet)


  • SO2: 0~300~3000ppm, O2: 0~25%
  • NOx: 0~300~3000ppm, Humidity: 0~40%
  • Dust: 0~200mg/m3, 0~10g/m3
  • Flow Rate: 0~40m/s (customizable)
  • Temperature: 0~300℃ (customizable)
  • Pressure: -10kPa~+10kPa (customizable)
  • Dimension: 800mm×600mm×1800mm
  • Heating Temp: 120℃~180℃
  • Enclosure Rating: cabinet IP42, others IP65
  • Power Supply: 220VAC, 5000W
  • Working Temp: -20℃~+50℃
  • Working Humity: 0~95%RH(no condensation)
  • Compressed Air Requirement: (0.4~0.8) MPa, 0.25m3/min, clean,
  • without oil or water

Product Inquiry